ActuaryTm

Have a local family member that purchased a DVD201 the middle of last year. He's been extremely satisfied with it thus far.

My apologies in taking so long to respond to these inquries - have unfortunately been quite occupied as of late. Any sort of budget? Also, any decision as far as 5.25" v 3.5" (wasn't clear from the last response if you'd decided one way or the other quite yet) ? Recommend checking the Newegg refurbished section often. Definitely hit or miss, but some excellent deals to be had there.

I would say so, yes. To some, that's extremely important. If opting for an aluminum enclosure however, the weight differential would be quite small. Yes. Screwed down, in general. How a 3.5" drive is attached in a 5.25" enclosure varies by manufacturer and model. Typically, screw holes in the bottom of the IDE drive are utilized. Nothing will be loose inside and rattling around in an unsafe manner, if that is the question. As far as shock-resistance, the outer casing and inner construction generally allows for that. A few inexpensive rubber washers from any hardware store (for use between the drive and enclosure) might be advisable if you are particular "rough" on your electronics. Aside from dropping the enclosure out a three story window however, the drives are typically well protected during normal use.

Fans are often not included in 3.5" enclosures. The reason behind this is quite simple - the power supply resides outside the enclosure in the form of a power brick adapter. Less heat inside the enclosure requires less heat dissipation. Believe the AMS Venus is one of the few models that offers both a fan and aluminum construction. There may be a Kingwin model that offers the same. My advice would be to instead consider a 5.25" aluminum enclosure. Nearly will include a fan, offer better ventilation (more airspace around the drive itself), and will be considerable less costly. Remember that nearly all 3.5" enclosures require either a power adapter or a power brick, which is of course separate from the enclosure itself. Often the perceived space saved by opting for the smaller enclosure is lost with the inclusion of a power adapter/brick/etc, as most 5.25" enclosures use a standard power supply power cord. It all depends of course on one's mobility desires. For those carrying the enclosure often, would have to weigh the benefits with the cost.

That's certainly a tough budget. Would definitely suggest USB 2.0 only (as opposed to a USB 2.0 & IEEE1394 combination), as they are typically more inexpensive. Also, as it appears you won't be physically transporting the enclosure often, also consider a 5.25" enclosure. Thought it seems somewhat contrary to logical thought, 5.25" enclosures are often cheaper than their 3.5" counterparts. Depends greatly on the make and model, of course. Even though it appears you've selected an enclosure (have been gone the past few days), here are a few suggestions in the case you or others are conitnuing to look: Plumax 5.25" USB 2.0 - $18.00 + Shipping (often PCMicroStore offers free shipping promotions, however)Plumax PM-350U2-PCB V4 3.5" USB 2.0 - $20.99 + ShippingVantec NexStar2 3.5" USB2.0 - Refurbished - $24.33 ShippedVantec NexStar Aluminum 3.5" USB2.0 - Refurbished - $25.44 ShippedSapphire Aluminum 3.5" USB 2.0 Lighted - $25.99 + ShippingSapphire Aluminum 5.25" USB 2.0 Lighted - $26.99 + ShippingPPA 1905 Aluminum 3.5" USB2.0 Lighted - Refurbished - $28.58 ShippedPlumax PM-525C2-PPB V4 5.25" USB 2.0 & IEEE1394 - $29.99 + ShippingBytecc 5.25" USB2.0 - $29.99 Shipped (Newegg One Day Sale)PPA 1943 Aluminum 3.5" USB 2.0 & IEEE1394 Lighted - Refurbished - $34.24 ShippedMetal Gear Aluminum 3.5" USB 2.0 Lighted - $34.00 + ShippingA few brief summary notes regarding the list above. Have personally owned at least one model of each of the manufacturers above, and feel safe recommending each as inexpensive enclosures. You may notice the list above includes a number from the refurbished section of Newegg. Stock selection changes quite rapidly in the refurbished section, but one can often find outstanding deals on enclosures. Have personally purchased a total of six refurbished enclosure from Newegg and have yet to have a single problem. Finding a "hot deal" however is very much hit or miss in comparison to the regular priced stock. Any rationale behind "the light bar"? On a budget enclosure, expect such a feature/embellishment to be left off. As for heat issues, aluminum v non-aluminum, fan v no fan, etc: personally run 3.5" IDE 7,200 RPM drives in nearly all the enclosures I make use of (have a few SATA enclosures now, so not all are 3.5" IDE 7,200 RPM). If cost is no object and/or one wishes to have the additional features of aluminum heat dissipation and a fan, then by all means purchase an enclosure offering such. However, for those on a budget and certainly those who will implement such an enclosure for sporadic periods of use, choosing one heat dissipation feature is often more than enough - and often times is overkill, to be honest. Case in point: have four 5.25" stacked enclosures each housing 200GB drives running 24/7 resting atop a 400SC server. Of the four, all are constructed of metal/plastic (in other words, not aluminum) with only one model having the benefit of a fan. At their highest temperatures, said drives reach 35-40°C (most temperature monitoring applications offer access to the S.M.A.R.T. drive data in such enclosures), which is well below any tolerance limits. The average operating temperature of said drives is typically 30-35°C - again, for drives under quite frequent daily use. Though obviously ambient temperature plays a factor, the casual end-user need not be hugely concerned with heat issues. Do suggesting keeping a close eye on the temperature the first few uses however until some sort of operating temperature indication is reached.

Jason: Will try to simplify: 5.25" - Generally internal desktop optical drives (CD, DVD, CD-RW, DVD+/-R/RW)3.5" - Generally internal desktop hard drives2.5" - Generally internal notebook hard drivesIf you read the above short paragraph in my previous reply describing the differences between 5.25" and 3.5" enclosures, and then explain how often you plan to use the enclosure and how mobile you would like it to be, I think it would help us help you quite a bit. I own literally a dozen different enclosures of varying size made by several manufacturers. It's difficult to offer advice however until I know a bit more about how you plan to use your new enclosure.

Slightly confused. You made mentioned of a Western Digital 160GB drive above. Likely that is a 3.5" internal desktop drive. You can use said drive in either a 3.5" or a 5.25" enclosure. The decision should be based on how often you plan to use the enclosure (sparingly for mobile backups, 24/7 mostly stationary usage carried between a few machines, constantly carried, etc), and how mobile you would like it to be (fit in a purse/baclpack/laptop bag, carried in a briefcase, etc). Obviously there is a size differential between the two size enclosures, and weight differences as well. 3.5" enclosures typically use a proprietary brick-like power adapter much like a notebook uses, while most 5.25" enclosures use a standard power supply cable indentical to those employed by desktop machines. Also, most 5.25" enclosures include a fan while their 3.5" counterparts do not. A bit more about your usage and mobility desires will make it easier to offer a suggestion.

Dealsonic often has some excellent deals on enclosures. Also be certain to check out Newegg, and its sister ChiefValue.

Which one, exactly? As Ross mentioned, there are three choices:USB - usually USB 2.0Firewire - also known as IEEE-1394a, or iLink (Sony's name for firewire)USB/Firewire combination - which offers both connection types mentioned above

That was precisely the thread I was going to post as it had a number of good suggestions.

You snooze, you lose. Sometimes however, if you snooze, lose, then snooze again, you can ultimately win.

For such small production runs, would suggest perhaps outsourcing to a local shop, such as Kinkos. Depends greatly on the desired quality. You may want to compare the output quality of the lower-end Canon line to perhaps something more along the lines of Primera. Definitely carefully examine the total cost per unit when considering an in-house solution, including the cost of printable media.

OfficeMax B&M is often very reasonable for rewritable DVD media. At my local OfficeMax (we have only one OfficeMax in Nyc since the one in Queens closed last year), it's easier to simply ask one of the sales representatives to check what DVD media they have in stock in their supply room, as most times it is not placed on the shelf. YMMV on your local store, however. Available at OfficeMax.com (and likely B&M): Imation 5-Pack DVD+RW - $8.99 Also available at Buy.com:Verbatim 10pk DVD+RW 4.7GB 4X Branded w/Jewel Case - $9.70 (qualifies for free shipping) One word of caution - regardless of the price, generally steer clear of Memorex media. Have found it be quite flaky, both in the writing process itself, and significant deterioration over time.

Ahh. Was going to suggest the Fuji DVD+RW 5 Pack for $1 (if available in your area).

Data, or video? For data, you might consider +RW/-RW.

Great resource.

Rechargables not an option?

Nearly 50% more elsewhere. Of course, being in New York, I would have to pay sales tax.

Definitely continue to check Amazon. Their deals change quite often, and are on average better than nearly all mobile retailers (save the occassional spectacular deal).

What size production runs? 100s? 1000s?

While it is unfortunately not the .PDF form, Google did cache enough to store an .HTML version of the form. Link.

Isn't one of the Rules of Acquisition, "Never admit a mistake if there is someone else to blame."? In any case, apology accepted. May your lobes grow large, and be stroked by females often.

If truly set on the R200, Epson offers a refurbished model direct for $77 shipped. Deals on the R200/R300 are very cyclical at office supply stores - generally every two to three months for $40 to $50 after rebate (less if purchased with an inexpensive digital camera, as there are often additional combination rebates as well). Be aware however that printable media is certainly not as inexpensive as standard media.

This is proof no one follows any of the URLs Jorge provides. The same precise link was posted above in Jorge's initial response. Jorge is getting upset.

If I am reading the specifications correctly, approximately the height of a floppy disc, a little more than half as wide, and less than an inch thick:"Size WxHxD: 2" x 3.3" x 0.7" / 51mm x 84mm x 19mm" Source